- What type of product is pure polyurea Tecnocoat P-2049?
- Where can I apply Tecnocoat P-2049?
- How should I apply Tecnocoat P-2049?
- Can I apply Tecnocoat P-2049 to paving or an existing roof?
- Are joints or seams needed?
- What colors are available for Tecnocoat P-2049?
- How long does Tecnocoat P-2049 take to dry?
- What happens in case of leakage?
- When can I apply Tecnocoat P-2049?
- What other elements besided roofing can I waterproof or protect?
- Is the application of Tecnocoat P-2049 rapid?
- What resistance does it have?
- Can I apply Tecnocoat P-2049 on another completed waterproofing that needs repair or substitution?
- Does it protect against corrosion?
- Is Tecnocoat P-2049 harmful?
- What type of certifications does the Tecnocoat P-2049 waterproofing system possess?
- What other uses or applications does Tecnocoat P-2049 have?
A two component projectable membrane, completely impermeable and solid. Also, it protects against corrosion and wear from external agents.
On any type of flat or inclinedsurface with a prior conditioning to the support. Since it is a projectable continuous membrane, it provides the versatility of being adaptable to any irregular surface.
Tecnocoat P-2049 is applied by means specific projection equipment, GRACO REACTOR E-XP2, with a control system for temperature and pressure for the products, which avoids possible mix errors in the composition of the components.
Yes, simply keep in mind the preparation of the surface, cleaning them of dust, oils or grease, or of possible voids which will need filling. The ideal application surface would be a completely continuous support and with a minimal and regular roughness.
Tecnocoat P-2049 does not have joints since the application is direct to the support, to perimeter parapets, and to singular points as there are sewer pipes, corners or finished work. Being a completely adherent membrane, it does not create interior air bags and, therefore, it has a very high superficial resistance.
It is perfectly applicable on existing joints of up to 10 mm. of width.
It appears in a variety of colors as there is gray, dark gray, black, green and red. Although if it is preferred it is possible to apply a specific aliphatic finish with a wide scale of RAL colors.
Tecnocoat P-2049, is stable and dry in seconds, it can be transited, guaranteeing the properties of the waterproofing, in an approximate period of 3 hours.
Failure of Tecnocoat P-2049 is scarce, although in case of moisture leakage due to a mistake in the application of the waterproofing, breakage after application, or repair of some existing element, as it is a completely adherent membrane, so the origin of the water coincides with the area of the leak, the location of this point is direct and therefore, it diminishes or limits to a minimum the work necessary for repair.
The support should be at least 4°C and above the dew point to reduce the risk of condensation.
Tecnocoat P-2049 can waterproof concretewalls, deposits, cisterns or swimming pools. As well as any element needing waterproofing or protection from corrosive agents.
Yes, performance is the most rapid in the market comopated to similar waterproofing membranes. It is possible to apply, in good conditions of support and climatology, up to 200 m2 of work per day.
It is a product with a high adhesion resistance to the support, minimum of 15 N/mm2, a break resistance of 35 N/mm., and traction resistance of 15 N/mm2.
Yes, with our system you only to clean the surface well, in some cases you may need to strip or sand, always under the supervision of an authorized product technician.
Yes, in cases in which corrosion protection is necessary, Tecnocoat P-2049 protects perfectly against this pathology.
No, in cases where it is necessary to apply in drinking water tanks, Tecnocoat P-2049 possesses a potability certificate (APPLUS nº223-09-8849), which guarantees its effectiveness without contaminating its surroundings.
The system Tecnocoat P-2049, possesses the certificate DITEXXXXX sent by the Institute Eduardo Torroja with a useful life of 25 years.
Also it has obtained the homologation in ethanol migration (APPLUS n° 2232-11-5626) and of water potability (APPLUS n°223-09-8849).
The versatibility of Tecnocoat P-2049, is quite broad. It can be applied in impermeable coverings in deposits, cisterns, interiors of bathrooms, aquariums both for exterior decoration and pavement.
Due to its hardness it can be applied in interior coverings for vehicles, trailers, interiors of dressing rooms...
Applications in swimming pools with all kinds of colors or forms.
Protection of high wear pavement, offering anti slip surfaces in areas such as parking ramps, or interiors of industrial warehouses.
In the field of the industry, protection against corrosion is a common and indicated application. Tecnocoat P-2049 offers a high resistance against a wide range of big chemical elements in solution or concentrates.
Occasionally, there are also military applications.